Drainage mats (English Version)
Technical dimension | Two-rib structure (B type) | Three-rib structure (T type) |
---|---|---|
Longitudinal tensile strength | 24-30kN/m | 28-35kN/m |
Water conductivity retention rate | ≥60%(500kPa load) | |
Composite method | Single/double-sided geotextile | Single/double-sided geotextile |
Note when using the hydraulic gradient test device:
Acctual engineering cases show that when the three-rib T2-8-W type product is selected, its hydraulic conductivity under a load of 1000kPa can reach 2.5×10-4m2/s
Engineering Scenario | Recommended Model | Key Considerations |
---|---|---|
Landfill | T2-8-WN | Acid and Alkali Resistance + High Water Conductivity |
Sponge City | B1-6 | Economic Priority |
Special Note: Weather-resistant (W) products must ensure OIT≥20min, and direct ultraviolet rays
should be avoided during constructionCompared with the 2008 version of the industry standard, this standard has the following major improvements:
Copyright ?2007-2025 ANTPEDIA, All Rights Reserved